Call Today! 1.800.265.9616

TPP Piston Seal

Movement

Reciprocating

Duty

Low Pressure

Action

Double

Description:

The TPP is a three piece, space saving, compact piston seal. The TPP is fitted for pressure to both sides of the piston and is designed mainly for housings according to ISO 6547. Typically used for low pressure reciprocating applications, the TPP also has excellent static sealing capacity and is very suitable for small housings.

Features
  • Good guidance
  • Highly wear-resistant
  • Space Saving
  • Simple fitting
  • Quick assembly
Applications
  • General cylinders
  • Agriculture equipment
Technical Data

Sealing Element:

Material:

Nitrile/FKM/HNBR

Material Code:

0101/0201/0120

Note: Alternative materials are available upon request

Guide Rings:

Material:

PEEK/Unfilled PTFE/Nylon

Material Code:

5001/1001/3001

Temperature:

-40°C to +204°C
-40°F to +400°F

Note: Temperature can vary depending on material chosen, as well as extrinsic factors.
Note: Alternative materials are available upon request

Speed:

2.3 ft/s

Pressure:

10,000 psi

Media:

Chemical compatibility chart

Note: All parameters can vary depending on the specific application, please take the above information as a general guideline. Should you have any concerns please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

Hardware Design Guidelines & Part Numbers

Radial clearances: inch"

N/A

Note: Please contact KC Seals for more info. This email address is being protected from spambots. You need JavaScript enabled to view it.

Surface finish: µinch

Roughness DepthMating SurfaceGroove Surface
Rmax 40-160 <625
RzDin 25-100 <400
Ra 4-16 <63

Note: The sizes listed below are all standard profile dimensions, K.C. Seals can and does manufacturer to non-standard housing dimensions.

Style Part #A Groove WidthH Groove DiameterG Bore Diameter
PT 0.150 0.190 0.375
PT 0.150 0.252 0.437
PT 0.150 0.315 0.500
PT 0.185 0.317 0.562
PT 0.185 0.380 0.625
PT 0.185 0.442 0.687
PT 0.185 0.505 0.750
PT 0.185 0.567 0.812
PT 0.185 0.630 0.875
PT 0.185 0.692 0.937
PT 0.185 0.756 1.001
PT 0.185 0.818 1.063
PT 0.185 0.881 1.126
PT 0.185 0.943 1.188
PT 0.185 1.006 1.251
PT 0.185 1.068 1.313
PT 0.185 1.131 1.376
PT 0.185 1.193 1.438
PT 0.185 1.256 1.501
PT 0.235 1.256 1.501
PT 0.304 1.256 1.501
PT 0.185 1.318 1.563
PT 0.185 1.381 1.626
PT 0.185 1.442 1.688
PT 0.185 1.506 1.751
PT 0.235 1.506 1.751
PT 0.304 1.506 1.751
PT 0.280 1.506 1.876
PT 0.280 1.627 2.001
PT 0.334 1.627 2.001
PT 0.424 1.627 2.001
PT 0.280 1.752 2.126
PT 0.280 1.877 2.251
PT 0.334 1.877 2.251
PT 0.424 1.877 2.251
PT 0.280 2.002 2.376
PT 0.424 2.002 2.376
PT 0.280 2.127 2.501
PT 0.334 2.127 2.501
PT 0.424 2.127 2.501
PT 0.280 2.252 2.626
PT 0.280 2.377 2.751
PT 0.424 2.377 2.751
PT 0.280 2.502 2.876
PT 0.424 2.502 2.876
PT 0.280 2.627 3.001
PT 0.334 2.627 3.001
PT 0.424 2.627 3.001
PT 0.280 2.752 3.126
PT 0.280 2.877 3.251
PT 0.280 3.003 3.377
PT 0.280 3.128 3.502
PT 0.334 3.128 3.502
PT 0.424 3.128 3.502
PT 0.280 3.253 3.627
PT 0.280 3.378 3.752
PT 0.280 3.503 3.877
PT 0.280 3.628 4.002
PT 0.334 3.628 4.002
PT 0.424 3.628 4.002
PT 0.280 3.753 4.127
PT 0.280 3.878 4.252
PT 0.280 4.003 4.377
PT 0.280 4.128 4.502
PT 0.334 4.128 4.502
PT 0.424 4.128 4.502
PT 0.280 4.253 4.627
PT 0.334 4.253 4.627
PT 0.280 4.378 4.752
PT 0.424 4.378 4.752
PT 0.280 4.503 4.877
PT 0.280 4.629 5.003
PT 0.424 4.629 5.003
PT 0.475 4.524 5.000
PT 0.579 4.524 5.000
PT 0.366 4.649 5.128
PT 0.366 4.774 5.253
PT 0.579 4.774 5.253
PT 0.366 4.899 5.378
PT 0.366 5.024 5.503
PT 0.475 5.024 5.503
PT 0.579 5.024 5.503
PT 0.366 5.149 5.628
PT 0.366 5.274 5.753
PT 0.366 5.399 5.878
PT 0.366 5.524 6.003
PT 0.475 5.524 6.003
PT 0.579 5.524 6.003
PT 0.366 5.649 6.128
PT 0.366 5.774 6.253
PT 0.475 5.774 6.253
PT 0.579 5.774 6.253
PT 0.366 5.899 6.378
PT 0.366 6.024 6.503
PT 0.475 6.024 6.503
PT 0.579 6.024 6.503
PT 0.366 6.274 6.753
PT 0.366 6.524 7.003
PT 0.475 6.524 7.003
PT 0.579 6.524 7.003
PT 0.366 6.774 7.253
PT 0.366 7.024 7.503
PT 0.579 7.024 7.503
PT 0.366 7.274 7.753
PT 0.366 7.524 8.003
PT 0.579 7.524 8.003
PT 0.366 7.774 8.253
PT 0.475 7.774 8.253
PT 0.366 8.024 8.503
PT 0.366 8.524 9.003
PT 0.475 8.524 9.003
PT 0.579 8.524 9.003
PT 0.366 9.024 9.503
PT 0.366 9.524 10.003
PT 0.475 9.524 10.003
PT 0.366 10.024 10.503
PT 0.366 10.524 11.003
PT 0.366 11.024 11.503
PT 0.366 11.524 12.003
PT 0.475 11.524 12.003
PT 0.366 12.024 12.503
PT 0.366 12.524 13.003
PT 0.475 12.524 13.003
PT-124 0.366 13.024 13.503
PT-125 0.366 13.524 14.003
PT-126 0.475 13.524 14.003
PT-127 0.366 15.024 15.503
Style Part #A Groove WidthH Groove DiameterG Bore Diameter