Call Today! 1.800.265.9616

AN Wiper

Movement

Reciprocating

Duty

Light

Action

Single

Description:

AN Style wipers are one of the most commonly used wiper seals and are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. This snap-in rod wiper will retrofit into glands prescribed in MS-33675 for corresponding dash numbers of MS-28776.

Features:
  • Flexible, snap-in design for easy installation into closed housings.
  • Available in a variety of different materials, giving the AN wiper diverse temperature and medium capabilities
  • Low compression set
  • Used in an array of applications
  • Low Cost
  • High Availability
Applications:
  • Agriculture Equipment
  • Hydraulic Cylinders
  • Hydraulic Jacks
  • Slide Valves
  • Valve Spindles
Technical Data

Material:

Nitrile/FKM/HNBR/Urethane

Material Code:

0101/0201/0120/2001

Note: Alternative materials are available upon request

Temperature:

Nitrile

-40°C to +120°C
-40°F to +250°F

FKM

-26°C to +204°C
-15°F to +400°F

HNBR

-40°C to +150°C
-40°F to +320°F

Urethane

-54 ºC to +105 ºC
-65 ºF to +220 ºF

Speed:

15 ft/s

Pressure:

Not Applicable

Media:

Chemical compatibility chart

Note: All parameters can vary depending on the specific application, please take the above information as a general guideline. Should you have any concerns please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

Hardware Design Guidelines & Part Numbers

Radial clearances: inch"

N/A

Please contact KC Seals for more info. This email address is being protected from spambots. You need JavaScript enabled to view it.

Surface finish: µinch

Roughness Depth Mating Surface Groove Surface
Rmax 40-160 <625
RzDin 25-100 <400
Ra 4-16 <63

Style Part # Groove Width D Rod Diameter B Shoulder Diameter S Housing Diameter A
AN-01 0.107 0.500 0.647 0.760
AN-02 0.107 0.562 0.710 0.823
AN-03 0.107 0.625 0.772 0.885
AN-04 0.107 0.687 0.834 0.948
AN-05 0.107 0.750 0.897 1.010
AN-06 0.107 0.812 0.960 1.084
AN-07 0.107 0.875 1.023 1.147
AN-08 0.107 0.937 1.085 1.209
AN-09 0.107 1.000 1.148 1.272
AN-10 0.107 1.062 1.210 1.334
AN-11 0.107 1.125 1.273 1.397
AN-12 0.107 1.187 1.335 1.459
AN-13 0.107 1.250 1.398 1.522
AN-14 0.107 1.312 1.480 1.614
AN-15 0.107 1.375 1.542 1.677
AN-16 0.107 1.437 1.605 1.739
AN-17 0.107 1.500 1.668 1.802
AN-18 0.107 1.625 1.793 1.927
AN-19 0.107 1.750 1.918 2.052
AN-20 0.107 1.875 2.043 2.117
AN-21 0.107 2.000 2.178 2.302
AN-22 0.107 2.125 2.303 2.427
AN-23 0.107 2.250 2.428 2.552
AN-24 0.107 2.375 2.553 2.677
AN-25 0.107 2.500 2.678 2.802
AN-26 0.122 2.625 2.834 2.989
AN-27 0.122 2.750 2.959 3.114
AN-28 0.122 2.875 3.084 3.239
AN-29 0.122 3.000 3.209 3.364
AN-30 0.122 3.125 3.334 3.489
AN-31 0.122 3.250 3.459 3.614
AN-32 0.122 3.375 3.584 3.739
AN-33 0.122 3.500 3.709 3.864
AN-34 0.122 3.625 3.834 3.989
AN-35 0.122 3.750 3.959 4.114
AN-36 0.122 3.875 4.084 4.239
AN-37 0.138 4.000 4.240 4.427
AN-38 0.138 4.125 4.365 4.552
AN-39 0.138 4.250 4.490 4.677
AN-40 0.138 4.375 4.615 4.372
AN-41 0.138 4.500 4.740 4.927
AN-42 0.138 4.625 4.865 5.052
AN-43 0.138 4.750 4.990 5.177
AN-44 0.138 4.875 5.115 5.302
AN-45 0.138 5.000 5.240 5.427
AN-46 0.138 5.125 5.365 5.552
AN-47 0.138 5.250 5.490 5.677
AN-48 0.138 5.375 5.615 5.802
AN-49 0.138 5.500 5.740 5.927
AN-50 0.154 5.625 5.896 6.114
AN-51 0.154 5.750 6.022 6.239
AN-52 0.154 5.875 6.146 6.364
AN-53 0.154 6.000 6.272 6.489
AN-54 0.154 6.250 6.522 6.739
AN-55 0.154 6.500 6.772 6.989
AN-56 0.154 6.750 7.022 7.239
AN-57 0.154 7.000 7.272 7.489
AN-58 0.154 7.250 7.522 7.739
AN-59 0.154 7.500 7.772 7.989
AN-60 0.154 7.750 8.022 8.239
AN-61 0.154 8.000 8.272 8.489
AN-62 0.154 8.500 8.772 8.989
AN-63 0.154 9.000 9.272 9.489
AN-64 0.154 9.500 9.772 9.989
AN-65 0.154 10.000 10.272 10.489
AN-66 0.154 10.500 10.772 10.989
AN-67 0.154 11.000 11.272 11.489
AN-69 0.169 12.000 12.272 12.489
Style Part # Groove Width D Rod Diameter B Shoulder Diameter S Housing Diameter A