Call Today! 1.800.265.9616

Canned Wiper

Movement

Reciprocating

Duty

Heavy

Action

Single

Description:

The J Style Canned Wiper utilizes a sturdy metal case, these wipers are molded from the same high performance urethane used for heavy duty applications. Specifically for heavy duty applications, as these wipers can withstand very hostile environments. The wiper edge removes even the toughest dirt and contaminants from the rod, keeping the system running clean and at its peak performance. The metal enclosure ensures a secure fit in the open housing, preventing expulsion of the wiper even under extreme conditions, and a low carbon steel case with rust inhibitor helps prevent premature corrosion.

Features:
  • Excellent wear resistance
  • High Availability
  • Easy Installation
  • Space Saving
  • Firm Fit
Applications:
  • Agriculture Equipment
  • Injection Molding
  • Hydraulic Jacks
  • Construction Equipment
  • Mobile Arms
  • Fork Lifts
Technical Data

Material:

Urethane

Material Code:

2001

Note: Alternative materials are available upon request

Temperature Range:

-54 ºC to +105 ºC
-65 ºF to +220 ºF

Speed:

3.5 ft/s

Pressure:

Not Applicable

Media:

Chemical compatibility chart

Note: All parameters can vary depending on the specific application, please take the above information as a general guideline. Should you have any concerns please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

Hardware Design Guidelines & Part Numbers

Radial clearances: inch"

N/A

Please contact KC Seals for more info. This email address is being protected from spambots. You need JavaScript enabled to view it.

Surface finish: µinch

Roughness DepthMating SurfaceGroove Surface
Rmax 40-160 <625
RzDin 25-100 <400
Ra 4-16 <63

Style Part #Groove Width DRod Diameter BHouse Diameter A
J 0500 0.125 0.500 0.750
J 0625 0.312 0.625 1.125
J 0687 0.187 0.687 1.000
J 0750 0.250 0.750 1.250
J 0875 0.312 0.875 1.375
J 0937 0.125 0.937 1.187
J 1000 0.312 1.000 1.500
J 1063 0.187 1.063 1.500
J 1125 0.312 1.125 1.625
J 1187 0.250 1.187 1.625
J 1250 0.312 1.250 1.750
J 1375 0.312 1.375 1.875
J 1500 0.312 1.500 2.000
J 1625 0.312 1.625 2.125
J 1750 0.312 1.750 2.250
J 1875 0.312 1.875 2.375
J 2000 0.312 2.000 2.500
J 2125 0.312 2.125 2.625
J 2250 0.312 2.250 2.750
J 2375 0.312 2.375 2.875
J 2500 0.312 2.500 3.000
J 2625 0.250 2.625 3.125
J 2750 0.312 2.750 3.250
J 3000 0.312 3.000 3.500
J 3250 0.312 3.250 3.875
J 3500 0.312 3.500 4.125
J 3625 0.312 3.625 4.250
J 3750 0.312 3.750 4.375
J 4000 0.312 4.000 4.625
J 4250 0.312 4.250 4.875
J 4500 0.312 4.500 5.125
J 5000 0.312 5.000 5.750
J 5250 0.312 5.250 5.875
J 6000 0.375 6.000 6.625
J 6750 0.375 6.750 7.375
Style Part #Groove Width DRod Diameter BHouse Diameter A