Call Today! 1.800.265.9616

K Wiper

Movement

Reciprocating

Duty

Medium

Action

Single

Description:

The K Style wiper is a snap-in wiper recommended for medium duty hydraulic applications and pneumatic applications.

Features:
  • Low cost
  • High Availability
  • Easy Installation
  • Space Saving
  • Firm Fit
Applications:
  • Agriculture Equipment
  • General Cylinder
  • Hydraulic Jacks
  • Construction Equipment
  • Mobile Arms
  • Fork Lifts
Technical Data

Material:

Nitrile/FKM/HNBR/Urethane

Material Code:

0101/0201/0120/2001

Note: Alternative materials are available upon request

Temperature:

Nitrile

-40°C to +120°C
-40°F to +250°F

FKM

-26°C to +204°C
-15°F to +400°F

HNBR

-40°C to +150°C
-40°F to +320°F

Urethane

-54 ºC to +105 ºC
-65 ºF to +220 ºF

Speed:

15 ft/s

Pressure:

Not Applicable

Media:

Chemical compatibility chart

Note: All parameters can vary depending on the specific application, please take the above information as a general guideline. Should you have any concerns please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

Hardware Design Guidelines & Part Numbers

Radial clearances: inch"

N/A

Please contact KC Seals for more info. This email address is being protected from spambots. You need JavaScript enabled to view it.

Surface finish: µinch

Roughness DepthMating SurfaceGroove Surface
Rmax 40-160 <625
RzDin 25-100 <400
Ra 4-16 <63

Style Part #Groove Width DRod Diameter BShoulder Diameter SHousing Diameter A
K 0500 0.155 0.500 0.625 0.760
K 0562 0.155 0.562 0.687 0.822
K 0625 0.155 0.625 0.750 0.885
K 0687 0.155 0.688 0.812 0.947
K 0750 0.195 0.750 0.832 1.135
K 0812 0.195 0.812 0.894 1.197
K 0875 0.195 0.875 0.957 1.260
K 0937 0.195 0.938 1.019 1.322
K 1000 0.195 1.000 1.082 1.385
K 1062 0.195 1.063 1.144 1.447
K 1125 0.195 1.125 1.207 1.510
K 1187 0.195 1.188 1.269 1.572
K 1250 0.195 1.250 1.332 1.635
K 1312 0.195 1.313 1.394 1.697
K 1375 0.195 1.375 1.457 1.760
K 1437 0.195 1.437 1.519 1.822
K 1500 0.195 1.500 1.582 1.885
K 1562 0.195 1.563 1.644 1.947
K 1625 0.195 1.625 1.707 2.010
K 1687 0.195 1.688 1.769 2.072
K 1750 0.195 1.750 1.832 2.135
K 1812 0.195 1.813 1.894 2.197
K 1875 0.195 1.875 1.957 2.260
K 1937 0.195 1.938 2.019 2.322
K 2000 0.195 2.000 2.082 2.385
K 2125 0.195 2.125 2.207 2.510
K 2250 0.255 2.250 2.407 2.760
K 2375 0.255 2.375 2.532 2.885
K 2500 0.255 2.500 2.657 3.010
K 2625 0.255 2.625 2.782 3.135
K 2750 0.255 2.750 2.907 3.260
K 2875 0.255 2.875 3.032 3.385
K 3000 0.255 3.000 3.157 3.510
K 3125 0.255 3.125 3.282 3.635
K 3250 0.255 3.250 3.407 3.760
K 3375 0.255 3.375 3.532 3.885
K 3500 0.255 3.500 3.657 4.010
K 3625 0.255 3.625 3.782 4.135
K 3750 0.255 3.750 3.907 4.260
K 3875 0.255 3.875 4.032 4.385
K 4000 0.255 4.000 4.157 4.510
K 4125 0.255 4.125 4.282 4.635
K 4250 0.255 4.250 4.407 4.760
K 4375 0.255 4.375 4.532 4.885
K 4500 0.255 4.500 4.657 5.010
K 4625 0.255 4.625 4.782 5.135
K 4750 0.255 4.750 4.907 5.260
K 4875 0.255 4.875 5.032 5.385
K 5000 0.255 5.000 5.157 5.510
K 5250 0.255 5.250 5.407 5.760
K 5500 0.255 5.500 5.657 6.010
K 5750 0.255 5.750 5.907 6.260
K 6000 0.255 6.000 6.157 6.510
K 6250 0.255 6.250 6.407 6.760
K 6500 0.255 6.500 6.657 7.010
K 6750 0.255 6.750 6.907 7.260
K 7000 0.255 7.000 7.157 7.510
K 7500 0.255 7.500 7.657 8.010
K 8000 0.255 8.000 8.157 8.510
K 8500 0.255 8.500 8.657 9.010
K 9000 0.255 9.000 9.157 9.510
K 9500 0.255 9.500 9.657 10.010
K 10000 0.255 10.000 10.157 10.510
Style Part #Groove Width DRod Diameter BShoulder Diameter SHousing Diameter A