Boost the performance of your downhole equipment with Victrex PEEK

Custom PEEK Parts

Overview

For many reasons, PEEK is one of the go-to materials for the oil and gas sector. To name a few:

  1. Excellent performance at high and low temperatures; -70°C to 260°C
  2. Superior chemical resistance. PEEK is inert to nearly all media that is seen in the oil and gas sector.
  3. Unmatched mechanical strength. PEEK’s compressive and impact strength make it ideal for the aggressive environments typically seen in the oilfield service sector.
  4. Hydrophobic. PEEK’s absorption rate of water is near zero, which is extremely important for companies operating in SAGD applications.
  5. Low thermal expansion. Temperature fluctuations can happen all the time in oil and gas applications; having a material that maintains its shape and stability is crucial for sealing applications.

Custom PEEK Parts For

  • Logging tools
  • Seals and backup rings
  • Connectors
  • Compressor components
  • Pumps (surface and submersible)
  • Plugs and packers
  • Composites
  • Cables and wireline
  • Tubes and pipes
  • Insulating components
  • Seat seats
  • And more

White Papers

  1. Hot and Sour Oil & Gas Environments – White Paper
  2. Victrex 450g Norsok M-710 – White Paper
  3. VICTREX Oil and Gas – Brochure

Quality You Can Rely On

Measurement 

All parts are measured on our Zeiss O-Machine and or Keyence CMM, which utilize optical and contact measurement technology in a comprehensive analysis. The O-Machine includes multi-sensor coordinate measuring, white light sensors for non-contact assessments and extremely accurate 3D scanners.

We follow AQL 2.5 levels 1 and 2 sample size quantities, and all molded parts are manufactured to RMA A2 tolerances. 

What comes with your orders:

  • Every order is sent with either a paper or digital QC document that includes ID, OD, C/S, Height, angles, and any other dimensions your organization feels critical. 

Materials

Our rubber and plastic materials supply is diversified amongst the top compounders in North America. Each polymer has been qualified to meet typical exploration and production well conditions, including mechanical, tribological, thermal, and specific immersive properties.

What comes with your orders:

  • Every order comes with an MTR that includes a batch number, cure dates, and a set of mechanical properties.

Available Compounds

PEEK

​

Material CodeDescriptionHeat DeflectionTensile StrengthTensile ElongationCompressive StrengthData Sheet
PEEKVictrex 450G PEEK. Good toughness and impact performance, with high elongation properties. Certified to ISO 23936/NORSOK M-710 for high sour fluid ageing.305F14300 psi45.0%18100 psi
GPEEKVictrex 450GL30 PEEK. Same features as virgin PEEK, but with higher tensile strength, as well as increased shear strength. Certified to ISO 23936/NORSOK M-710 for high sour fluid ageing.620F26000 psi2.7%37000 psi
P5030Bearing Grade PEEK530F8000 psi2.5%13000 psi
P5045PTFE Filled PEEK300F9500 psi7.0%12800 psi
P5035Lubricated PEEK530F11000 psi3.6 %18100 psi

Let’s Talk

You’ve made it this far, but we know there is still more to discuss. Click on the book a meeting button below to easily setup up a date and time to talk more about your project. You can also email us at info@kcseals.ca

Book a Meeting

Related Products